Centrifugal Double Deep Suction Water Pump With 120 Kw Motor
Centrifugal Double Deep Suction Water Pump are single stage centrifugal pumps with a double suction impeller supported between bearings. Essentially, the pump casing is split into two separate chambers, hence the name split casing or double suction centrifugal pump. If it is split vertically in relation to the impeller it is referred to as a vertical split case pump, and if it is split horizontally is it a horizontal split case pump. This design makes split case centrifugal pumps suitable for higher flow rate applications usually involving water and thin, low viscosity liquids at low pressure.
? Mounting- A separate, adjustable motor mounting plate can be doweled into place by the installer after coupling is aligned in ? eld to ensure accurate, lasting alignment. The pump is permanently bolted and doweled to the base at the factory to prevent pump movement and misalignment.
? Coupling- A spacer-type coupling is standard and allows easy replacement of seals and bearings without removing motor or casing top.
? Easy Maintenance- A thrust collar sleeve prevents the rotating assembly from dropping if a bearing should fail. A lip seal prevents liquid from entering the lower bearing housing.
? Easy Handling- Lifting holes placed in the top and side of the base make lifting and installation easier.
We're Here to Help